dji Zenmuse Z15-A7 - Pre-Flight Checklist

Zenmuse Z15-A7
User Manual
20
©
2015 DJI. All Rights Reserved.
Pre-Flight Checklist
Pre-Flight Checklist
Ensure the gimbal is properly installed and attached to the landing gear, and that the camera is
mounted correctly and securely.
Before powering on, spin the gimbal through its complete rotation by hand on each axis to ensure
nothing is blocking its movement.
Ensure all cables are connected correctly, without any plugged in backwards or into the wrong
ports.
Ensure the AV video power cable is properly soldered and shielded if an AV video transmission
module is used.
Verify TX settings.
Verify a proper connection between the GCU and the RC receiver.
Verify a proper connection between the GCU and the ight control system.
Ensure the latest Flight Control System rmware is installed.
Refer to the Gimbal LED Indicator section in the Appendix to understand the connection status
between the camera and gimbal.
Refer to the Troubleshooting section in the Appendix if an abnormal situation occurs.
Pre-Flight Checklist