dji Zenmuse Z15-A7 - Upgrade

Zenmuse Z15-A7
User Manual
©
2015 DJI. All Rights Reserved.
19
Upgrade
You can view the latest rmware version information on this page. Upgrade the rmware by following the
steps below:
1. Connect the gimbal to your computer with a Micro-USB cable, and wait until the blue indicator LED in the
Assistant is blinking.
2. Click” Upgrade”.
3. Wait for the download to nish.
4. Click “Upgrade” again then click “Conrm”.
5. Power cycle the gimbal after the upgrade is complete.
Ensure your computer is connected to the internet.
Close any antivirus programs and network rewalls during the upgrade.
Ensure the gimbal is powered on during the upgrade.
Do not disconnect the USB cable during the upgrade.
Make sure that before turning on the gimbal it already has a camera mounted.
Make sure there are no obstructions when turning on the gimbal.
Info
You can check the Assistant version via Info.
S/N is a 32 digit authorization code for function activations. The authorization code for your unit is lled in at
the time of manufacture. In the future, you may be asked to ll in a new S/N if you require function upgrades.
Fill in the S/N and then click the Write button. If you ll in an invalid S/N more than 30 times, your gimbal will be
locked and you will have to contact DJI customer support.
PC Assistant Tuning