DMP Electronics 9000 Series User Manual

9000 Series Installation and Programming Guide | Digital Monitoring Products, Inc. 17
CARD FORMATS
Select DMP to allow credentials that use a 26-45bit data
string. The menu advances to REQUIRE SITE.
Select CUSTOM to disable DMP format and program slots 1-8
as needed. The menu advances to FORMAT NO.
Select ANY to allow all Wiegand card reads to activate the
door strike relay. The door strike relay is activated for the
length of time programmed in ZN3 REX TIME. No user code
information is sent to the panel. The menu advances to NO
COMM WITH PNL.
The default card format is DMP.
CARD FORMATS
DMP CUSTOM ANY

DMP Electronics 9000 Series Specifications

General

Brand	DMP Electronics
Model	9000 Series
Category	Keypad
Language	English