9000 Series Installation and Programming Guide | Digital Monitoring Products, Inc. 25
Additional Programming (9063 only)
9063 keypads allow users to present a proximity credential to the built-in proximity
reader. Users can also manually enter their user code into the keypad. The keypad verifies
the user code and its authority with the panel.
Proximity Credential Compatibility
DMP keypads with internal proximity readers are compatible with most standard 125kHz
proximity credentials. For a list of publicly supported card formats, see Public Card
Formats.
Note: Some proximity credentials are not compatible with DMP proximity keypads.
Test the intended proximity credentials with the application before installation. DMP
does not guarantee compatibility with credentials not purchased from DMP.
Program a Credential
1. Access the User Menu by pressing CMD until MENU? NO YES displays. Choose
YES, and present your proximity credential to the reader or manually enter your
user code at the keypad.
2. Press CMD until USER CODES? displays.
3. Press any select key. Choose ADD.
4. At ENTER CODE: -, present the credential to the reader. The keypad works by
reading the user code from the data string sent by the access control reader.
To Next Page
Loading...
Need help?
General
