DMP 8860 - Connect to Wi-Fi and Update the Keypad; Connect the Keypad to Wi-Fi; Update the Keypad Locally; Update the Keypad Remotely

To Next Page

To Previous Page

8860 Installation and Programming Guide | Digital Monitoring Products 7

CONNECT TO WI-FI AND UPDATE THE KEYPAD

To use the most up to date keypad features available, you will need to connect the keypad to Wi-Fi and update your

keypad to the latest ﬁrmware version. This step is necessary regardless of if you have wired the keypad with a Keypad

Bus Connection or a Network (Wi-Fi) Connection.

Connect the Keypad to Wi-Fi

1. Select Options from the Carousel menu.

2. Select Wi-Fi Settings.

3. Select the Wi-Fi network you would like to connect to.

4. Enter the password and select CMD.

Update the Keypad Locally

1. Connect the keypad to the Wi-Fi network before proceeding.

2. Select Options from the Carousel menu, then select Installer Options.

3. Enter 3577 and enter CMD. Select Check for Updates. Follow the on-screen prompts to complete update.

Update the Keypad Remotely

1. Connect the keypad to the Wi-Fi network before proceeding.

2. Navigate to Dealer Admin.

3. Select the user and system.

4. Next to the keypad name, select Update.