DNP DS-RX1 HS - 2.3 Default values for settings

17
[DS-RX1 Printer Driver] Instruction Manual (For Windows 11)
2.3 Default values for settings
The following section shows the default values of the settings (at installation). If the settings have
been changed, and the printer driver no longer operates normally, return to the default values shown
below.
Note) Depending on the service pack of your operating system or your usage environment, the
default values at installation may differ from those in the chart below.
Chart 2.3 Default print settings
Tab
Setting
Value
Layout
Orientation
Portrait
Page Order
Front to Back
Pages Per Sheet
1
Paper/Quality
Color
Color
Option
Border
Disable
Sharpness
0 (Default)
Color Adjustment
ICM
Color
Adjustment
Gamma
0
Brightness
0
Contrast
0
Chroma
0
Advanced
settings
(In the Layout
tab, click
“Advanced...”)
Paper/Output
Paper Size
(6x4)
Copy Count
1 Copy
Graphic
Print Quality
300 x 300dpi
Image Color
Management
ICM Method
ICM Handled by Host
System
ICM Intent
Pictures
Document
options
Advanced Printing Features
Enabled
Pages per Sheet Layout
Right then Down
Printer function
Border
Disable
Overcoat Finish
Glossy
Print Re-try
Disable
2inch cut
Disable