DNP DS-RX1 HS - Chapter 2 Properties; 2.1 Open the printer properties

8
[DS-RX1 Printer Driver] Instruction Manual (For Windows 11)
Chapter 2 Properties
You can configure various printer settings from the Properties of the driver. Make sure you
understand the contents well before changing settings. To use the properties, log in as an
administrator. Depending on the application you are using, you must perform this operation from the
print settings of the application.
2.1 Open the printer properties
2. From the “Settings” screen, select “Bluetooth & devices” -> “Printers & scanners”.
1. Click “Start”, and then select “Settings” to open the Settings screen.