1.4 Install drivers for unspecified devices
If the printer does not appear on the Printers & scanners screen, select “Devices” on the “Bluetooth &
devices” screen. Select “More devices and printer settings” on the “Devices” screen to open the
“Devices and Printers” screen. If you connect a printer that is on to the computer before installing the
driver package, a device is created under “Unspecified” in “Devices and Printers”.
Figure 1.4.1 Photo Printer under Unspecified
In such a case, use the following method to install the printer driver.
Furthermore, use the following method to install the printer driver if you use the standard installation
procedure (install the driver package, connect the printer, and then install the printer driver), but the
driver is not installed correctly, and a device is created under “Unspecified”.
1. Install the driver package
When the driver package has not yet been installed, install it by following the procedure in “1.2
Install the driver package”.
If you install the driver package, installation of the printer driver for the unspecified device completes
it automatically.
2. Installing a driver for an unspecified device
Refer to page 7 for the driver installation procedure for an “Unspecified” device after installing the
driver package.
To Next Page
Loading...
