Get Started
All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
1. Visit UconnectPhone.com to check mobile
device and feature compatibility and to find
phone pairing instructions.
2. Reduce background noise. Wind noise and
passenger conversations are examples of
noise that may impact recognition.
3. Speak clearly at a normal pace and volume
while facing straight ahead. The microphone
is located in the headliner and aimed at the
driver.
4. Each time you give a Voice Command, you
must first push either the VR or Phone but-
ton, wait until after the beep, then say your
V oice Command.
5. Y ou can interrupt the help message or sys-
tem prompts by pushing the VR or Phone
button and saying a Voice Command from
current category.
Uconnect Phone Button
, Push to initiate,
answer, or end a phone call.
Uconnect Voice Recognition Button
.
1. Short Press: Push and release the VR button
to begin Radio, Climate, Navigation, and
other embedded functions. After you hear
the single beep, say a command.
2. Long Press: Push and hold continuously for a
few seconds, then release the VR button for
Siri functions. After you hear the familiar Siri
"double beep," say a command.
Phone Hang Up Button, Push to end a call.
Uconnect VR And Phone Buttons
1 — Uconnect Phone Button
2 — Uconnect Voice Recognition Button
3 — Phone Hang Up Button
287
To Next Page
Loading...
