— Service AWD Warning Light —
If Equipped
This telltale will turn on to indicate the All
Wheel Drive (AWD) system is not functioning
properly and that service is required. Contact
your authorized dealer .
— Service Stop/Start System Warning
Light — If Equipped
This telltale will turn on to indicate the Stop/
Start system is not functioning properly and
service is required. Contact your authorized
dealer for service.
— LaneSense Warning Light —
If Equipped
The LaneSense Warning Light will be solid yel-
low when the vehicle is approaching a lane
marker. The warning light will flash when the
vehicle is crossing the lane marker .
Refer to “LaneSense — If Equipped" in “Start-
ing And Operating” for further information.
— Service LaneSense Warning Light —
If Equipped
This light will turn on when the LaneSense
system is not operating and needs service.
Please see your authorized dealer .
Yellow Indicator Lights
Forward Collision Warning Off Indicator
Light — If Equipped
This light indicates that Forward Collision W arn-
ing is off.
— AWD Low Indicator Light — If
Equipped
This light alerts the driver that the vehicle is in
the all-wheel drive LOW mode. The front and
rear driveshafts are mechanically locked to-
gether forcing the front and rear wheels to rotate
at the same speed. AWD LOW is designed for
loose, slippery road surfaces only.
Refer to “All Wheel Drive Operation” in “Start-
ing And Operating” for further information on
all-wheel drive operation and proper use.
Green Indicator Lights
— Adaptive Cruise Control (ACC) Set
With Target Light — If Equipped
This will display when the ACC is set and a
target vehicle is detected. Refer to “Adaptive
Cruise Control (ACC)” in “Starting And Operat-
ing” for further information.
— Adaptive Cruise Control (ACC) Set
Without Target Light — If Equipped
This will display when the ACC is set and a
target vehicle is not detected. Refer to “Adap-
tive Cruise Control (ACC)” in “Starting And
Operating” for further information.
— ECO Mode Indicator Light
This light will turn on when ECO Mode is active.
— Cruise Control Set Indicator Light
— If Equipped
This light will turn on when the speed control is
set to the desired speed. Refer to “Speed Con-
trol” in “Starting And Operating” for further
information.
GETTING TO KNOW YOUR INSTRUMENT PANEL
84
To Next Page
Loading...
