Dodge Durango 2018 - Common Phone Commands (Examples); Mute (or Unmute) Microphone During Call; Transfer Ongoing Call between Handset and Vehicle

Complete The Android Pairing Procedure:
1. Confirm the passkey shown on the mobile
phone matches the passkey shown on the
Uconnect system then accept the Bluetooth
pairing request.
NOTE:
Some mobile phones require the PIN to be
entered manually , enter the PIN number
shown on the Uconnect screen.
Select The Android Mobile Phone's Priority
Level
When the pairing process has successfully com-
pleted, the system will prompt you to choose
whether or not this is your favorite mobile phone.
Selecting “Y es” will make this mobile phone the
highest priority. This mobile phone will take pre-
cedence over other paired mobile phones within
range and will connect to the Uconnect system
automatically when entering the vehicle. Only
one mobile phone and/or one Bluetooth audio
device can be connected to the Uconnect sys-
tem at a time. If “No” is selected, simply select
“Uconnect” from the mobile phone/audio device
Bluetooth screen, and the Uconnect system will
reconnect to the Bluetooth device.
NOTE:
Keep in mind that software updates – either on
your phone or Uconnect system – may interfere
with the Bluetooth connection. If this happens,
simply repeat the pairing process. However,
first, make sure to delete the device from the list
of phones on your Uconnect system. Next, be
sure to remove Uconnect from the list of devices
in your phone’ s Bluetooth settings.
You are now ready to make hands-free calls.
Press the Uconnect “Phone” button
on
your steering wheel to begin.
NOTE:
Refer to UconnectPhone.com website for addi-
tional information on mobile phone pairing and
for a list of compatible phones.
Common Phone Commands (Examples)
• “Call John Smith”
• “Call John Smith mobile”
• “Dial 1 248 555 1212”
• “Redial”
Mute (Or Unmute) Microphone During Call
• During a call, press the “Mute” button on the
Phone main screen to mute and unmute the
call.
Transfer Ongoing Call Between Handset
And Vehicle
• During an on-going call, press the “Transfer”
button on the Phone main screen to transfer
an on-going call between handset and vehicle.
Pairing Request
283