2. GENERAL SPECIFICATIONS
Our dryers in their different models and complements have been designed to meet the highest operating,
reliability, and drying capacity requirements.
The machine is standard equipped with the COOL DOWN (progressive cooling) system to avoid burning
when taking the load out and possible spontaneous combustion. It also prevents creasing in delicate
clothing.
Basic equipment:
• Gas, electric, steam or thermal oil system.
• Radial-axial air flow system.
• Cool-Down system. (Configured).
• Drum rotation reversal.
• Stainless steel drum AISI 430.
• TOUCH electronic model: Electronic control system using microprocessor with high performance
touch screen.
• Model with recirculation: Residual humidity control system with intelligent dry (variable speed or
throughout the cycle). Hot air recirculation system with progressive control via humidity sensor.
Comprehensive thermal insulation. Double door glass. Sprinkler system.
The TECHNICAL SPECIFICATIONS for each model are specified in the following table:
Production (Elec. heating)
*(Recirculating option) (GLP: PROPANE GAS / GB: BUTANE GAS / GN: NATURAL GAS)