Activate/deactivate anti-crease function. At the end of the drying cycle, if the laundry is not
removed from the machine, the anti-crease function activates the drum for a few seconds, alternating
between on and off, to reduce the formation of creases in the fabrics.
Activate/deactivate sump resistor (only dryers with heat pump).
Grace period (only self-service): programmable time during which it is possible to cancel a
programme without losing the available credit.
Currency (only self-service).
Drying prices by programme (only self-service).
Price programming by time schedule (only self-service).
Payment method (only self-service): coin or multi-payment.
Loss of credit balance and inactivity time (only self-service): inactivity time in minutes which
must elapse before the credit balance is reset to zero.
Continuous/discontinuous time (only self-service): in continuous time mode, although the
machine is not operating, the remaining credit continues to be deducted (pause, door open…). In
discontinuous mode, credit is only deducted when the machine is running.
8. HOW TO RUN A DRYING CYCLE
• OPL mode:
When the machine is in WAIT mode, proceed as follows:
1. If the OFF screen is displayed, touch the screen
anywhere and the main menu will be displayed.
2. In the main menu, use the arrows to select the
required programme and press START to activate
the drying cycle.
Note: The drying cycle parameters (temperature,
time, etc.) can be edited quickly prior to the start
by pressing on the central icon, editing the
required values and then pressing START. The
modified values will not be saved for future
operations.
9. ALARMS AND WARNINGS
In the Touch control, the different alarms and warnings are displayed on screen with a brief description.
When any of these alarms is triggered: 3, 4, 6, 8, 9, 14, 15, 16, 17, 18, 19, 21, 22, 23 and 24, the
machine enters an alarm mode which permits a progressive reduction of the internal temperature of the
dryer and the fabrics to prevent damage to the materials and prevent burns. This cooling lasts 10
minutes. After this time the machine stops but the alarm remains on until it is duly cancelled. The alarm
mode cooling can be cancelled by cancelling the alarm.
To Next Page
Loading...
