In dispenser cycles (emission of perfume or product for the treatment of laundry) the
parameters to be determined are as follows:
• My programmes: list of selected and available programmes for display on the Main screen of
the programme library.
• Programme library: list of predetermined programmes created by the user.
7.2. Configure system.
The Touch control has multiple options for which, depending on the model and the available extras, the
following parameters can be modified to a greater or lesser degree.
Language:
Time:
Date:
Units of measurement (ºC or ºF)
RABC/ traceability: period during which the data stored by the control are collected.
HUD or display menu: menu in which the appearance and format of the dryer screens are
defined.
Restricted access: this allows the edition of the dryer parameters to be password-protected.
Activate/deactivate beep: the sound made by the dryer can be activated or deactivated.
Drum rotation speed: the drum rotation speed can be adjusted (in rpm).
Self-service statistics: the programme payment and run data can be collected.
Import/export configuration of a USB memory.
Activate/deactivate intelligent dry (intelligent dry, adapt speed, requires humidity control kit).
1. Objective dispenser temperature (ºC/ºF) As soon as the temperature falls below
this temperature, the dispensing operation will take place.
2. Dispenser movement time (minutes): time during which the machine turns the drum
without heating in order to distribute the perfume evenly.
3. Dispenser time (seconds): time during which the machine releases the perfume.
4. Rotation reversal (seconds): if this is activated (ON) it is possible to select the
rotation time in clockwise and anticlockwise directions independently.
5. Drum rotation speed.
To Next Page
Loading...
