Structure and Operation
80
D760.H03E-001.H1907
Side tool kit
Out-opening tool kits are provided for
driver's side and passenger's side in the D760
cab, and they are equipped with lamps for easy
taking of objects by readers. The lamp is
equipped with a contact switch which will be trig-
gered to make the lamp to turn off in case the
box cover is closed; when the glove box cover
pops up, the switch will automatically pop up to
turn on the lamp.
Opening/closing method of side tool kit
1. Opening: pull the side tool kit ring at the back
of seat as shown in Fig. H-D760-011 to
unlock the side tool kit of which the cover will
pop up for an angle; in this case, pull the
cover along the lower edge of the side tool kit
cover to open the tool kit;
CAUTION:
In case the lock is not completely
unlocked and the side tool kit cover
can not be opened as the ring is
pulled, please keep the operation of
pulling the ring to open the side tool
kit cover, so as to open the side tool
kit.
2. Closing: pull the cover downward along the
lower edge of the side tool kit cover until it is
located as a lower position, and give the
cover a hard covering; during closing, a
clamping sound of the buckle can be heard,
and after closing, the cover should be lower
than the cab surrounding plane; if the cover
is flush with the surrounding plane or slightly
protruding, it may be caused by un-tight
locking of the tool kit; in this case, please
close the tool kit cover again.
To Next Page
Loading...