Structure and Operation
D760.H03E-001.H1907 81
Cup holder
The cup holder is located below the trans-
mission shift console.
Opening: press the cup holder to pop the
cup up.
Closing: push the cup holder back to close
it.
220V power socket
The 220V power socket, located at back of
driver's seat and passenger's seat, can be pow-
ered on by pulling the handle and pressing the
power switch until the green lamp turns on.
This socket, used for supplying of external
power, is not controlled by the ignition switch but
the master power switch of the complete vehicle.
The rated load of this socket is 220V, 360W.
CAUTION:
When getting power via this socket, the load is strictly prohibited to
exceed the nominal capacity of the socket.
To Next Page
Loading...