DongFeng E70 User Manual

Troubleshooting
4.3-8
Trouble code
DTC Description
Fault causes
Recommended
countermeasures
C0065
Wheel speed sensor 2 (RL)
failed
1. External wiring/circuit
abnormal
2. Mounting position of sensor
improper
3. External connection of
sensor abnormal
4. Inductive head of sensor
damaged
1. Verify the external wiring and
circuit
2. Adjust the mounting position
of sensor
3. Replace the sensor.
4. Replace the sensor.
C0066
Incorrect wheel gear number
1. Wheel abnormal
2. Wheel speed sensor
connection abnormal
3. Wheel speed sensor sensing
head failed
1. Verify the tire condition.
2. Verify the external
connection of wheel speed
sensor.
3. Replace the wheel speed
sensor.
C0067
Master cylinder pressure
sensor failed
1. External system or actuator
failed
2. Sensor damaged
3. STP-SW abnormal
4. STP-SW malposition
1. Eliminate the external fault.
2. Replace the ESC.
3. Replace the STP-SW.
4. Adjust the STP-SW position.
C0068
G sensor failed
Internal damage of ESC
Replace the ESC.
C0069
YrG sensor failed
Internal damage of ESC
Replace the ESC
C006A
Sensor not calibrated
Sensor not calibrated
Calibrate the sensor.
C006B
Steering angle sensor signal
abnormal
1. External wiring/circuit
abnormal
2. Sensor damaged
1. Eliminate the external fault.
2. Replace the sensor.
C006C
Steering angle sensor not
calibrated
Sensor not calibrated
Calibrate the sensor.
U0293
VCU signal abnormal
VCU failed
Check the VCU end operation.
U0103
ESM signal
ESM failed
Check the ESM end operation.
U0073
CAN communication
1. VUC/ESM/SAS failed
2. CAN BUS abnormal
1. Check the operation of
VUC/ESM/SAS.
2. Check the external fault.

DongFeng E70 Specifications

General

Brand	DongFeng
Model	E70
Category	Automobile
Language	English