DoorKing 6004 - Model 6550

Vehicular Gate Operators April, 2015
Model 6550
Adjustable Limit Swing Gate Operators
Designed to operate very large vehicular swing gates in commercial and industrial applications. Secondary operators are
used in bi-parting (dual) gate applications cannot be used as a stand-alone device.
Operators
6550-080 1 HP, 115V (9.7A) Primary
6550-084 1 HP, Secondary
• Secondary includes 50-ft interconnection cable
High Voltage Kit
2600-266 High Voltage Kit
• Allows the operator to be powered from 208, 230, 460
or 575 source voltage. In dual gate applications, only
one (1) kit is required (secondary operator DOES NOT
require a high voltage kit).
Accessories
Entrapment prevention devices (required) ..................... Pg 20
Loops and loop detectors ............................................... Pg 21
Backup power inverters .................................................. Pg 26
6550-480 Heater Kit 115 VAC
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
6500-490 Uphill Arm Pivot Assembly
• Use with 1203-084 Torsion Rod Assembly (Pg 10)
Swing gate accessories ..............................................Pg 10-11
Gate operator accessories .........................................Pg 22-24
Model 6550 Maximum Capacities
Model
Max Gate
Weight (Lbs)
Max Gate
Width (Ft)
Max Cycles
(Per Day)
1 HP
2000
25
Cont
Page Rev 4/1/15
Section A1, Page 10 Specifications subject to change without notice.