April 2015 Vehicular Gate Operators
Slide Gate Accessories
Guide Rollers, Chain Idler, End Catch
Guide rollers are guarded to meet current industry safety standards. The DKS chain idler assembly is used when slide gate
operators are rear-mounted. The end retainer provides a guide for slide gates to slip into, and has a cap that prevents the
gate from being lifted off the track when it is in the full closed position.
3 Inch Guide Rollers
1204-120 Single
1204-122 Dual
1204-005 3-Inch replacement roller
• Use two for 6-inch roller
6 Inch Guide Rollers
1204-121 Single
1204-123 Dual
Chain Idler Assembly
2600-818
• Use with rear-mount slide gate operators. Works with
#40 and #41 chain
End Catch
1204-004
• Designed for gates with 2-inch frame
1204-120 1204-122
1204-121 1204-123
2600-818
1204-004
4.5
3.25
8.25
8.254.50
3.25
Adjustable
1.25 – 2.125
Adjustable
1.25 – 2.125
Adjustable
1.25 – 2.125
Adjustable
1.25 – 2.125
Adjustable
.875 – 2.625
Adjustable
.875 – 2.625
4.00
7.00
4.50
2.00
3.125
2.755.50
7.00 5.00
4.00 2.00
Specifications subject to change without notice. Section A1, Page 19
To Next Page
Loading...
