DoorKing 6004 - Slide Gate V-Wheels

Vehicular Gate Operators April, 2015
Slide Gate Accessories
V-Wheels
DKS V-wheels are used in slide gate applications that utilize an inverted “V” type track. V-Wheel assemblies are designed
for 2 inch gate frames and tandem assemblies can be used on any size frame.
Replacement V-Wheels
1201-004
• 4-inch UHMW Sleeve Bearing 500 Lb Max Wt
1201-006
• 4-inch UHMW Sealed Bearing 750 Lb Max Wt
1201-016
• 4-inch Steel Sealed Bearing 1500 Lb Max Wt
1201-000
• 6-inch Steel Sealed Bearing 2500 Lb Max Wt
V-Wheel Assemblies
1201-102
• 4-inch UHMW Sleeve Bearing 500 Lb Max Wt
1201-105
• 4-inch UHMW Sealed Bearing 750 Lb Max Wt
1201-117
• 4-inch Steel Sealed Bearing 1500 Lb Max Wt
4 Inch Tandem V-Wheel Assemblies
1201-012
• 4-inch UHMW Sealed Bearing 1500 Lb Max Wt
1201-010
• 4-inch Steel Sealed Bearing 3000 Lb Max Wt
6 Inch Tandem V-Wheel Assembly
1201-210
• 6-inch Steel Sealed Bearing 5000 Lb Max Wt
Page Rev 4/1/15
Section A1, Page 18 Specifications subject to change without notice.