DoorKing 6004 - Model 9000

Vehicular Gate Operators April, 2015
Model 9000
Adjustable Limit Slide Gate Operators
The model 9000 slide gate operator is designed to operate vehicular sliding gates in residential commercial and industrial
applications. The operator has a full feature circuit board and includes 20-feet of #40 chain. Secondary operators are used
in bi-parting (dual) gate applications and are commanded from and powered from the primary operator. Secondary
operators cannot be used as a stand-alone device.
Operators
9000-080 1/2 HP, 115V (5.4A) Primary
9000-081 1/2 HP, 115V (5.4A) Secondary
High Voltage Kit (1/2 HP operator only)
2600-266 High Voltage Kit
• Allows the operator to be powered from 208, 230, 460
or 575 source voltage.
9000-085 1 HP, 115V (9.7A) Primary
9000-086 1 HP, 115V (9.7A) Secondary
9000-087 1 HP, 208V 1
Ø
(5.0A)
9000-088 1 HP, 230V 1
Ø
(4.9A)
• Secondary operator is not available for 208 / 230 Volt
1
Ø
units
Accessories
Entrapment prevention devices (required) ..................... Pg 20
Loops and loop detectors ............................................... Pg 21
Backup power inverters .................................................. Pg 26
1601-154 Heater Kit
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
9000-015 Post Mount Kit
• Includes baseplate, mounting posts and hardware.
2600-755 30-ft. Bi-parting gate connection cable
2600-756 40-ft. Bi-parting gate connection cable
2600-757 50-ft. Bi-parting gate connection cable
Additional chain .............................................................. Pg 18
Slide gate accessories ................................................Pg 16-18
Gate operator accessories .........................................Pg 22-24
Model 9000 Maximum Capacities
Motor
Max Gate
Weight (lbs.)
Max Gate
Length (ft.)
Cycles
(day)
1/2 HP
1000
35
Cont.
1 HP
1500
35
Cont.
Page Rev 4/1/15
Section A1, Page 16 Specifications subject to change without notice.