DoorKing 6004 - Gate Operator Control Stations

Vehicular Gate Operators April, 2015
Control Stations
Manual Control
Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs
found on DKS gate operators require only 3 wires for connection to a 3-button control station.
1200-007
• 3-button interior open-close-stop
• Mounts into single-gang electric box
• Use for most DKS gate operators (cannot be used with
model 9000)
1200-006
• 3-button interior/exterior open-close-stop
• Surface or post mounted
• Use for most DKS gate operators (cannot be used with
model 9000)
1200-017
• Open-hold-normal gate control
• Mounts into single-gang electric box
Page Rev 4/1/15
Section A1, Page 24 Specifications subject to change without notice.