Dormakaba ED50 - Page 29

29
ED50/ED100/ED250 09-2021DL4617-003
dormakaba ED50/ED100/ED250 OHC Header
Setup and Troubleshooting Instructions
Chapter 11
. Set OHC reveal depth parameter rd = 

rd
Reveal depth
rd factory setting = .
Step 
Press
Scroll to rd parameter.
Step 
Press
Displays "" , factory setting.
Step 
Press
"" starts flashing.
Step 
Press
Scroll to "".
Step 
Press
Scroll to "".
Step 
Press
Saves value.
Display stops flashing.
Step 
Press
Returns to reveal depth parameter.
Step 
Go to Para. ., Set door type
parameter dL.
.. Set parameter rd, reveal depth = .
Fig. 11.6.1 Reveal depth parameter rd
.. Set rd reveal depth parameter value to .
NOTICE
. OHC reveal depth = , set rd = .
• "" is rd factory setting.
• For system to recognize rd = , steps in
Para. .. must be followed.