Dormakaba PORTEO - Maintenance; Wear parts; Care

12 PORTEO
2021-03WN 060008 45532
dormakaba Mounting instructions Maintenance
6 Maintenance
6.1 Wear parts
The following parts are wear parts and need
to be inspected and, if necessary, replaced
once per year.
• Arm
• Sliding block
• Slide rail
Only original spare parts may be used.
6.2 Maintenance from dormakaba
Regular maintenance of your units pays off:
weak points are detected and eliminated at
an early stage and your unit’s service life is
increased.
dormakaba and our authorized partners
offer premium maintenance service for
automatic doors and hold-open systems,
which gives the building operators reliable
safety through the official seal of approval.
If not all door units have been properly
tested, the building operator may be liable
for property damage and personal injury in
the event of an accident. Regardless of
safety aspects, regular maintenance also
makes sense from an economic point of
view. Any damage or wear can thus be
detected and repaired at an early stage. The
risk of unforeseen costs, such as high repair
costs, can be minimized – and we help you
to keep an eye on your budget – always with
the aim of increasing the service life of your
door units.
dormakaba takes over the complete
organization and execution of maintenance
for you. The advantage to you: all units –
including units from other manufacturers –
are tested by trained experts at the
scheduled regular intervals. The facility
operator does not have to worry about
anything else, legal requirements are reliably
fulfilled.
A maintenance contract around the door
ensures tested functionality with a premium
standard!
We want to win you over too – get a
non-binding and free offer for a
maintenance contract.
Further information on this and many other
topics of the dormakaba service can be
found on our homepage at www.
dormakaba.com
6.3 Care
CAUTION
Never insert metal objects into
the openings on the PORTEO.
Doing so would risk an electric
shock.
CAUTION
Cleaning work must only be
performed in a de-energized
state.
• Do not allow any water or other liquids to
penetrate the PORTEO.
• Clean the operator with a damp cloth and
commercial cleaners.
• To prevent any surface damage, do not
use any abrasives.
• Only switch the device back on once the
surfaces are dry.