Troubleshooting
A70622-D1
152/192
SPS Replacing Interconnect Rack Board Assy 1 / 1
Special Tools
Flat Screwdriver 6mm + Allen Key 2mm
Prerequisite
Switch off the laser
Unplug from the mains supply
Electronic Plate is removed
Remarks
1
Unplug connectors from JP1 to JP7
and the ribbon cable
2
Unscrew the four (4) CHC screws
from the board (A)
Unscrew the four (4) screws from
the connector (B)
3
Replace the board. Reconnect
mechanically and electrically
To Next Page
Loading...