Printer description
A70622-D1
56/192
For integration, take into account the design of the IP65 laser head model. It will take an
additional space of approximately 83 mm in height to the HD version head of 7000. Take in
mind that you have to connect the two 75mm diameter hoses which will take additional space
especially if you need to contort hose as you will be limited by its bending radius : you will
need at least 140 mm.
.
75 mm
140 mm
General overview about the installation
83 mm
A flexibe tube is used to adapt
FS400 tube with laser head tube
To Next Page
Loading...