Technical data_ en
,QVWUXFWLRQVIRUXVH_ X-am
®
8000
In pump mode: If the gas detector is used
permanently in pump mode, the operating time is
reduced by approx. 2 h.
Operating time in normal conditions (diffusion
mode)
1)
:
1) The nominal operating time of the gas detector at an ambient
temperature of 20 to 25 °C, 1013 mbar, alarms less than 1 %
of the time, power-save mode display activated. The actual
operating time varies depending on the ambient temperature
and pressure and battery and alarm conditions.
With IR and 3 EC sensors Typically 22 h
With CatEx, PID and 3 EC
sensors
Typically 17 h
With CatEx, IR and 3 EC
sensors
Typically 12 h
With IR, PID and 3 EC
sensors
Typically 16 h
With PID Typically 42 h
To Next Page
Loading...
Need help?
General
