Dräger Oxylog 1000 User Manual

Care
Dismantling
Care
After each operational use of the ventilator, dismantle and
disinfect the ventilation valve, ventilation hose, volume
metering parts and PEEP valve.
The ventilator and compressed gas hoses must also be
cleaned/disinfected if severely soiled.
Dismantling
• Remove Oxylog 1000 from its holder.
1 Unscrew the 02 compressed gas hose from the
Oxylog 1000.
2 Remove the ventilation hose from the connector on
the side of the ventilator.
• To remove the ventilation hose, always grip it by
the sleeve and not the spiral stiffening ridges.
Otherwise the spiral ridges may be torn, e.g. at the
sleeve, or the hose may be ripped out of the sleeve.
• Remove the ventilation valve from the ventilation hose.
• Pull the PEEP valve out of the ventilation valve,
or
• remove and dismantle the volume metering parts.
11

Dräger Oxylog 1000 Specifications

General

Brand	Dräger
Model	Oxylog 1000
Category	Fan
Language	English