Dräger Oxylog 1000 User Manual

Care
Disinfecting/Cleaning
Dismantling the ventilation valve
1 Turn the cover about 45° counter-clockwise = unlock,
and remove the cover.
2 Remove the diaphragm. Do not dismantle any further.
• Do not allow any foreign matter to enter the
housing of the ventilation valve.
Protect the diaphragm from damage.
Disinfecting/Cleaning
Use only preparations classified as »surface
disinfectants" for disinfecting. For material compatibility,
we recommend preparations based on
- aldehydes,
- alcohols,
- quaternary ammonium compounds.
Due to possible damage to materials, the following
preparations are unsuitable:
- compounds containing alkylamine
- compounds containing phenol
- halogen-releasing compounds
- strong organic acids
- oxygen-releasing compounds.
For users in the Federal Republic of Germany, we
recommend the use of disinfectants listed in the current
DGHM list (DGHM = German Society for Hygiene and
Microbiology).
The DGHM list (published by mhp Verlag GmbH,
Wiesbaden) also specifies the active basis of each
disinfectant. For countries where the DGHM list is
unavailable, we recommend products based on the
above active bases.
12

Dräger Oxylog 1000 Specifications

General

Brand	Dräger
Model	Oxylog 1000
Category	Fan
Language	English