Dräger Oxylog 1000 User Manual

Care
Disinfecting/Cleaning
Sterilising
Wipe disinfecting
Ventilator, 02 compressed gas hose:
• Wipe disinfect with e.g. Buraton 10 F or Terralin.
Strictly follow the Instructions for Use of the
disinfectant manufacturer. Coarse impurities must first
be removed with a disposable cloth.
• Do not allow any liquids to penetrate inside the
ventilator or O 2 compressed gas hose.
Liquid inside the system can impair ventilation.
Immersion disinfecting
Dismantled components of the ventilation valve,
ventilation hose, volume metering parts,
not the Volumeter 3000:
• Disinfect in disinfectant bath with e.g. Gigasept FF =
formaldehyde-free.
Strictly follow the Instructions for Use of the
disinfectant manufacturer.
Thoroughly stir the parts in the solution.
Do not clean with hard brushes.
Do not allow any foreign object to enter the inside of
the ventilation valve.
• Rinse thoroughly with Aquadest.
• Allow the parts to dry fully.
If any water remains in the ventilation valve,
the ventilation function may be impaired.
Sterilising
Sterilise as follows if necessary:
Dismantled components of the ventilation valve and
ventilation hose:
• sterilise in 134 °C hot steam.
PEEP valve and Volumeter 3000:
• treat as specified in their specific Instructions for use.
After care
• Preparation, page 14
• Connect the O 2 supply, page 16
• Check that the system is ready for operation, page 18.
13

Dräger Oxylog 1000 Specifications

General

Brand	Dräger
Model	Oxylog 1000
Category	Fan
Language	English