Dräger Primus User Manual

Getting started
Breathing system
@ Complete and engaged, hoses firmly plugged in.
@ Insert optional filters.
@ Fresh soda lime, without violet discoloration.
T
Drain any water which may have collected in the ventilator
diaphragm.
Correct operation of the workstation will be impaired by =
condensation flowing back into the breathing system and
ventilator diaphragm.
@ install water traps in the hoses.
Care must be taken when connecting the patient. | | EN
Risk of strangulation! グ
AGS anaesthetic gas scavenging system
1 The transfer hose from the waste gas port must be
connected.
2 The scavenging hose must be connected, the anaesthetic
waste gas probe must be plugged into the Drager wall
socket and the indicator must be green.
3 The float must be between the two marks.
instructions for Use Primus SW 2.n
37
uni
0018
uni
0018

Dräger Primus Specifications

General

Type	Anesthesia Workstation
Oxygen Flush	Yes
Ventilation Modes	Pressure Support
Gas Supply	O2, Air, N2O
Vaporizers	Isoflurane, Sevoflurane, Halothane
Patient Monitoring	Airway Pressure
Backup Battery	Yes
Alarms	Apnea, Gas supply failure
Power Supply	AC Mains, Battery Backup