Dräger X-am 2000 Technical Handbook

11
Activating the Device
Activating the Device
Before using the device for the first time,
insert the supplied batteries or a charged
NiMH power pack T4 (order no. 83 18 704),
refer to Replacing the Batteries, page 41.
Charge the rechargeable batteries if
necessary, page 42.
The Dräger X-am 2000 is ready for
operation.
Only in the case of Dräger X-am 1100 and
Dräger X-am 1700:
The following activation sequence also has to
be carried out:
●
Press and hold the key for approx. 3
seconds until the countdown
» 3 . 2 . 1 «
shown in the display has elapsed.
— The remaining operating time is
displayed, e.g.
» d 730 « (remaining
operating time 730 days).
— After that, the device is automatically
switched off again. You can switch it on
again at any time by pressing the key.
M
+
02223854
_
01
_
de.e
p
s
OK
on

Dräger X-am 2000 Specifications

General

Brand	Dräger
Model	X-am 2000
Category	Measuring Instruments
Language	English