Description | en
Instructions for use | X-plore 8000 Face Shield X-plore 8000 Helmet PC visor HL1 11
3.2 Feature description
The following products belong to the Dräger X-plore 8000
series facepieces that are described in these instructions for
use:
– Dräger X-plore 8000 face shield
– Dräger X-plore 8000 helmet with PC visor HL1
The facepieces are connected to a breathing air supply via a
hose. The air from the breathing air supply is blown through
the air circulation system to the user's face. The resulting
overpressure prevents the penetration of ambient air that may
contain contaminants. Excess air can escape through the
sealing cuff of the facepiece.
3.3 Intended use
The facepieces may only be used in the following
combinations:
The facepieces protect the wearer from
– ambient air containing contaminants,
– solid and liquid particles,
–impacts.
3.4 Limitations on use
In ambient atmospheres with oxygen deficiency, the
facepieces can only be used in combination with a
compressed air hose unit, as they do not supply oxygen.
When used in combination with a powered air-purifying
respirator, the facepieces are not suitable for use in ambient
atmospheres with oxygen deficiency. Therefore, do not enter
unventilated containers, e.g. pits, ducts, etc. with the Dräger
X-plore 8000 facepieces and powered air-purifying
respirators!
The following factors can impair the protective effect of the
facepieces:
– High wind speeds and strong crosswinds.
– Earpiece or beards in the sealing cuff area.
3.5 Approvals
The Dräger X-plore 8000 face shield is approved according
to:
The Dräger X-plore 8000 helmet with PC visor HL1 is
approved according to:
Legend:
All parts comply with the requirements of the following
regulations:
– (EU) 2016/425
– Regulation 2016/425 on personal protective equipment,
as amended to apply in GB
For information on the respective system approvals, please
refer to the instructions for use of the respirators listed in
section 3.3.
Declarations of conformity: see
www.draeger.com/product-
certificates
3.6 Explanation of type-identifying
marking and symbols
3.6.1 Name plate and packaging
Powered air-puri-
fying respirators
X-plore 8000
series
Compressed air
hose devices
X-plore 9300
series
Dräger X-
plore 8000 face
shield
XX
Dräger X-
plore 8000 helmet
with PC visor HL1
X
Standard Performance level/Marking
EN 812:2012 (head protec-
tion)
-
EN 166 (eye-guard) 1 BT 9 3
Standard Performance level/Marking
EN 397 (head protection) -
EN 166 (eye-guard) 1 BT 9 3
Meaning of the marking according to EN 166
1 Optical class
BT Protection against high-
speed particles at extreme
temperatures
3 Protection against liquid
droplets or splashes
9 Protection against melted
metal and hot solids
Symbol Explanation
Batch
Order number
Date of manufacture
Maximum storage area humidity ≤ 90 %
Storage temperature range
Follow the instructions for use
LOT
<90%