Draminski iScan mini - How to End Operation of the Ultrasound Scanner; How to Turn the Ultrasound Scanner off; Cleaning and Disinfection

DRAMIŃSKI iScan mini – user guide
12
6. How to end operation of the ultrasound scanner
6.1. How to turn the ultrasound scanner o
In order to turn the ultrasound scanner o, press and hold the On / O button for approx. 2 seconds.
Remember, pressing the ON/OF button for a short time will freeze the image.
6.2. Cleaning and disinfection
Remember to clean and disinfect the ultrasound scanner after nishing work with it.
Clean it with a wet cloth or paper towel.
Attention! Never wash the ultrasound scanner under running water!
Attention! Remember not to make the battery contacts wet! Prevent water from penetrating the ultra-
sound scanner through ventilation slots!
In order to clean the ultrasound scanner:
1. Turn o the device.
2. Disconnect the battery.
3. Put protective plugs into the googles and data transmission sockets.
4. Wipe the battery, the probe and the ultrasound scanner with a wet cloth or a paper towel.
5. Wipe all elements dry.
To disinfect the ultrasound scanner and its accessories, use the products intended for disinfection of medical
devices which do not contain alcohol.