EasyManua.ls Logo

Draminski iScan mini - Safe Use

Draminski iScan mini
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRAMIŃSKI iScan mini user guide
6
2. Safe use
Warning! User and patient safety depends on the compliance with the following
guidelines!
1st DRAMIŃSKI iScan mini is a device that should be used only by qualied personnel for diagnostic purposes.
2nd The ultrasound scanner and its equipment should be disinfected after their potential contact with conta-
gious substances.
3rd The ultrasound scanner cannot be used simultaneously with other high frequency devices (HF).
4th The users of the ultrasound scanner are recommended to have regular technical inspections performed by
the manufacturer every two years.
5th It is forbidden to dismantle the device and perform repairs and adjustments on one's own, except the ac-
tivities described in the user guide.
6th The users of the ultrasound scanner are recommended to regularly check the probe cable and the point
where it is connected to the ultrasound scanner against mechanical damage.
7th If mechanical damage of the probe or the cable is identied, the device needs to be sent to the service
centre.
8th The ultrasound scanner has a sturdy design, however, in order to avoid mechanical damage, please, follow
the instructions specied in this section of the user guide.
9th Avoid exposure of the device to strong sunlight. It is recommended to observe the temperature specied
on the labels of the device and its components.
10th The user is forbidden to introduce any modications to the device.
11th DRAMIŃSKI iScan mini is an electric device that can be the source of electromagnetic radiation. Its op-
eration can be disturbed by other electric devices, that is why it is recommended to limit the number of
electric devices in its vicinity as much as possible.
12th When the device and its accessories reach their lifetime, due to the risk for the environment, they should
be recycled by specially qualied entities in accordance with the applicable legislation or returned to the
manufacturer.

Table of Contents