25
DRAMIŃSKI iScan mini – user guide
11.8. LCD brightness
Adjust the display brightness depending on current lighting conditions.
Adjustment is possible in a scale of 1–15 degrees.
In order to adjust brightness:
1. Open the Menu.
2. Go to Settings.
3. Go to LCD Brightness.
4. Use arrows to set the value.
5. Conrm with the OK button.
11.9. Date/Time
This option enables updating date and time in accordance with the calendar used by the user.
When this option is selected, a dialog box appears in which you can set date and time successively. Subsequent
eld is activated after conrming the previous one.
11.10. Brightness
This option is used to adjust brightness of the display screen. You should remember that the level of brightness
inuences the time of battery operation. The range of adjustment is within 10% to 100%.
11.11. Language
After the language has been selected and the OK button has been pressed, the system automatically changes
to the selected language version.
11.12. Factory settings
This option enables restoring default settings for certain parameters of the image if they were changed by the
user and there is a need to restore standard settings. Selecting this option causes resetting the scanner and
restoring all of the saved settings. Images and cine loops which were saved are not deleted.
11.13. Automatic shutdown
This option enables setting the time after which the system automatically turns o: never, 5 min., 15 min., 30
min., 60 min.
In 60 seconds before the automatic shutdown, the screen will display the following message: “Auto power OFF,
60 seconds” — the system will count down 60 seconds until shutdown. The message disappears if any of the
buttons is pressed, and the system will count down the set time again.
To Next Page