Draminski iScan mini - Mirror Image; Network Settings; Wifi; Wifi Hotspot

DRAMIŃSKI iScan mini – user guide
24
In order to rotate the image:
1. Open the Menu.
2. Go to Settings.
3. Go to Rotate image by 90°.
4. Conrm with the OK button.
When the image is rotated, all the data are shown at the bottom part of the screen.
Attention! The navigation buttons show the direction in accordance with the image orientation!
11.6. Mirror image
This function allows the mirroring of the ultrasound scanner image upside-down.
In order to mirror the image:
1. Open the Menu.
2. Go to Settings.
3. Go to Mirror image.
4. Conrm with the OK button.
11.7. Network settings
In network settings you may turn on the WiFi to connect to a router or commence broadcasting a signal to
connect to a mobile app.
11.7.1. WiFi
Connecting to a WiFi network enables updating of the ultrasound scanner software.
In order to connect with a WiFi network:
1. Open the Menu.
2. Go to Settings.
3. Go to Network settings.
4. Select WiFi.
5. The system will show a list of available networks. Select a network and accept.
6. Should a password be required, use the keyboard displayed on the screen.
7. An icon which denotes an active network connection will appear in the main window.
11.7.2. WiFi HotSpot
The function enables broadcasting a WiFi signal to other devices in order to connect them to the ultrasound
scanner. Turning on the HotSpot is necessary to use the mobile app.
To broadcast the WiFi signal:
1. Open the Menu.
2. Go to Settings.
3. Go to Network settings.
4. Select WiFi HotSpot.
5. The ultrasound scanner will broadcast a network named Dramiński Ultrasound.
6. An icon which denotes an active network connection will appear in the main window.