Vigor3200 Series User’s Guide
3
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
WAN1- WAN4 Connecters for remote networked devices.
DMZ Connecter for local DMZ host.
LAN Connecter for local network devices.
USB Connecter for 3G Modem or printer.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
To Next Page
Loading...
Need help?
General
