Vigor3200 Series User’s Guide
305
Item Description
Samba Service Settings
Click Enable to invoke samba service via the router.
Access Mode
LAN Only – Users coming from internet cannot connect to
the samba server of the router.
LAN And WAN - Both LAN and WAN users can
access samba server of the router.
NetBios Name Service
For the NetBios service of USB storage disk, you have to
specify a workgroup name and a host name. A workgroup
name must not be the same as the host name. The workgroup
name can have as many as 15 characters and the host name
can have as many as 23 characters. Both them cannot contain
any of the following--- ; : " < > * + = \ | ?.
Workgroup Name – Type a name for the workgroup.
Host Name – Type the host name for the router.
After finishing all the settings here, please click OK to save the configuration.
4
4
.
.
1
1
4
4
.
.
2
2
U
U
S
S
B
B
U
U
s
s
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to set profiles for FTP/Samba users. Any user who wants to access into
the USB diskette must type the same username and password configured in this page. Before
adding or modifying settings in this page, please insert a USB diskette first. Otherwise, an
error message will appear to warn you.
Each item is explained as follows:
Item Description
Index
Display the number link of the profile.
Username
Display the name that FTP/Samba users will use for accessing
into FTP/Samba server.
To Next Page
Loading...
Need help?
General
