Vigor3200 Series User’s Guide
124
Each item is explained as follows:
Item Description
General Setup-----
Allow to configure settings for each subnet respectively.
Index - Display all of the LAN items, DMZ and IP Routed
Subnet.
Status- Check the box to enable such LAN configuration.
Basically, LAN1 status is enabled in default. LAN2, LAN3,
LAN4 and IP Routed Subnet can be observed by checking
the box of Status.
DHCP- Check the box to enable DHCP server for such
LAN configuration. LAN1 is configured with DHCP in
default. If required, please check the DHCP box for each
LAN.
IP Address - Display the IP address of the LAN
configuration. Display the IP address for each LAN item.
Such information is set in default and you can not modify it.
Details Page - Click it to access into the setting page. Each
LAN will have different LAN configuration page. Each
LAN must be configured in different subnet.
Force router to use “DNS
server IP address”
settings as specified in …
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4 instead of DNS servers given
by the Internet Access server (PPPoE, PPTP, L2TP or
DHCP server).
To Next Page
Loading...
Need help?
General
