Vigor3200 Series User’s Guide
217
time. You can inquiry an NTP server (a time server) on the Internet to synchronize the router’s
clock. This method can only be applied when the WAN connection has been built up.
Each item is explained as follows:
Item Description
Set to Factory Default
Clear all profiles and recover to factory settings.
Index
Click the number below Index to access into the setting page of
schedule.
Status
Display if this schedule setting is active or inactive.
You can set up to 15 schedules. Then you can apply them to your Internet Access or VPN
and Remote Access >> LAN-to-LAN settings.
To add a schedule:
1. Click any index, for example Index No.1.
To Next Page
Loading...
Need help?
General
