Vigor2920 Series User’s Guide
3
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
GigaLAN (1-4) Connecters for local networked devices.
WAN1/WAN2(Giga) Connecters for remote networked devices.
USB Connecter for 3G Modem or printer.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
Need help?
General
