Vigor2920 Series User’s Guide
194
Use Browser Time Select this option to use the browser time from the remote
administrator PC host as router’s system time.
Use Internet Time Select to inquire time information from Time Server on the
Internet using assigned protocol.
Time Protocol Select a time protocol.
Server IP Address Type the IP address of the time server.
Time Zone Select the time zone where the router is located.
Automatically Update Interval Select a time interval for updating from the NTP server.
Click OK to save these settings.
4
4
.
.
1
1
2
2
.
.
7
7
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session.
Allow management from the
Internet
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the
router from Internet. Check the box(es) to specify.
Disable PING from the Internet
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by default.
Access List You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the
router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
Need help?
General
