Vigor2920 Series User’s Guide
128
All – All the actions (Pass and Block) will be recorded in Syslog.
URL Access Control Enable URL Access Control - Check the box to activate URL
Access Control. Note that the priority for URL Access Control is
higher than Restrict Web Feature. If the web content match the
setting set in URL Access Control, the router will execute the action
specified in this field and ignore the action specified under Restrict
Web Feature.
Prevent web access from IP address - Check the box to deny any
web surfing activity using IP address, such as http://202.6.3.2. The
reason for this is to prevent someone dodges the URL Access
Control. You must clear your browser cache first so that the URL
content filtering facility operates properly on a web page that you
visited before.
Action – This setting is available only when Either : URL Access
Control First or Either : Web Feature First is selected. Pass -
Allow accessing into the corresponding webpage with the keywords
listed on the box below.
Block - Restrict accessing into the corresponding webpage with the
keywords listed on the box below.
If the web pages do not match with the keyword set here, it will be
processed with reverse action.
Group/Object Selections – The Vigor router provides several
frames for users to define keywords and each frame supports
multiple keywords. The keyword could be a noun, a partial noun, or
a complete URL string. Multiple keywords within a frame are
separated by space, comma, or semicolon. In addition, the maximal
length of each frame is 32-character long. After specifying keywords,
the Vigor router will decline the connection request to the website
whose URL string matched to any user-defined keyword. It should
be noticed that the more simplified the blocking keyword list, the
more efficiently the Vigor router perform.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
Need help?
General
