Vigor2920 Series User’s Guide
172
Mode At present, the router can connect to Mixed (11b+11g),
11g Only, 11b Only, Mixed (11g+11n), 11n Only and
Mixed (11b+11g+11n) stations simultaneously. Simply
choose Mix (11b+11g+11n) mode.
Note: You should also set RADIUS Server
simultaneously if 11g Only, 11b Only or 11n Only mode is
selected.
Index(1-15) Set the wireless LAN to work at certain time interval only.
You may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The
default setting of this field is blank and the function will
always work.
Hide SSID Check it to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your
wireless LAN. Depending on the wireless utility, the user
may only see the information except SSID or just cannot
see any thing about Vigor wireless router while site
surveying. The system allows you to set four sets of SSID
for different usage. In default, the first set of SSID will be
enabled. You can hide it for your necessity.
SSID Means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID is "DrayTek. We suggest you to change it.
Isolate
LAN – Check this box to make the wireless clients
(stations) with the same SSID cannot access wired
PCs on LAN.
Member –Check this box to make the wireless clients
(stations) with the same SSID not accessing for each
other.
Channel Means the channel of frequency of the wireless LAN. The
default channel is 6. You may switch channel if the
selected channel is under serious interference. If you have
no idea of choosing the frequency, please select Auto to let
system determine for you.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
Need help?
General
