Vigor2920 Series User’s Guide
251
Available settings are explained as follows:
Item Description
Activate
Click it to access into MyVigor for activating WCF service.
Setup Query Server
It is recommended for you to use the default setting,
auto-selected. You need to specify a server for categorize
searching when you type URL in browser based on the web
content filter profile. Such server is powered by
Commtouch.
Setup Test Server
It is recommended for you to use the default setting,
auto-selected. Such server is powered by Commtouch.
Find more
Click it to open http://myvigor.draytek.com for searching
another qualified and suitable server.
Set to Factory Default
Click this link to retrieve the factory settings.
Default Message
You can type the message manually for your necessity or click
this button to get the default message which will be displayed
on the field of Administration Message.
Cache
None – the router will check the URL that the user wants to
access via WCF precisely, however, the processing rate is
normal. Such item can provide the most accurate URL
matching.
L1 – the router will check the URL that the user wants to
access via WCF. If the URL has been accessed previously, it
will be stored for a short time (about 1 second) in the router to
be accessed quickly if required. Such item can provide
accurate URL matching with faster rate.
L2 – the router will check the URL that the user wants to
To Next Page
Loading...
Need help?
General
