Draytek VigorAP 810 - 3.9 RADIUS Server

VigorAP 810 User’s Guide
101
3
3
.
.
9
9
R
R
A
A
D
D
I
I
U
U
S
S
S
S
e
e
r
r
v
v
e
e
r
r
VigorAP 810 offers a built-in RADIUS server to authenticate the wireless client that tries to
connect to VigorAP 810. The AP can accept the wireless connection authentication
requested by wireless clients.
Available settings are explained as follows:
Item Description
Enable RADIUS
Server
Check it to enable the internal RADIUS server.
Users Profile
Username – Type a new name for the user profile.
Password – Type a new password for such new user profile.
Confirm Password – Retype the password to confirm it.
Configure
 Add – Make a new user profile with the name and
password specified on the left boxes.
 Cancel – Clear current settings for user profile.
Delete Selected – Delete the selected user profile (s).
Delete All – Delete all of the user profiles.
Authentication Client
This internal RADIUS server of VigorAP 810 can be treated as
the external RADIUS server for other users. Specify the client IP
and secret key to make the wireless client choosing VigorAP
810 as its external RADUIS server.
Client IP – Type the IP address for the user to be authenticated
by VigorAP 810 when the user tries to use VigorAP 810 as the
external RADIUS server.