Transport, storage and packaging
11
• At an interval of approx. 6 months: Check uncoated surfaces for corrosion. Should
traces of corrosion be detected, renew the corrosion protection.
• Ensure that actuators are fully operational by performing a test run every 6
months.
3.3
Packaging
Our products are protected by special packaging for transport when leaving the fact-
ory. They consist of environmentally friendly materials which can easily be separated
and recycled. We use the following packaging materials: wood, cardboard, paper, and
PE foil. For disposal we recommend recycling centres.
To Next Page
Loading...
