Servicing and maintenance
34
Warning instructions on the device must neither be removed nor covered by paint.
Use of any cleaning agents within the actuator is not permitted. Any contamination
may be removed using lintless cloths free of any contamination. Use of compressed
air is not permitted.
8.5
Disposal
During decommissioning and disassembly of actuators, observe any potential installa-
tion-specific hazards. If required, appropriate disposal can be offered by the manufac-
turer. Actuators can easily be separated and sorted according to materials used:
• Electronic scrap
• various metals
• plastics
• greases and oils
The following generally applies:
• Generally, greases and oils are hazardous to water and must not be released into
the environment.
• Arrange for controlled waste disposal of the disassembled material or for separate
recycling according to materials.
• Heed the national regulations for waste disposal.
To Next Page
Loading...
