Dremel 3D20 Idea Builder User Manual

15
BUILD
Tapping this option will begin the building process
while displaying useful information and object
status.
STOP – Tapping this option will cancel the object.
You will be asked whether to cancel building or
continue building.
PAUSE/PLAY – Tapping this option will pause or
resume the building process. This will allow you to
access the “filament” button.
FILAMENT – Tapping this option will allow you to
unload or load the filament while the build is paused.
COPY
Tapping this option will allow you to copy a model
file from an SD card to your Dremel 3D20 onboard
memory. You cannot copy a model file from your
Dremel 3D20 to an SD card.
COPY MODEL
Tapping this option will confirm your decision to copy
your model file from your Dremel 3D20’s onboard
memory or an SD card.
COPY MODEL SUCCESSFUL
A pop-up alert notifying you that the model file has
been successfully copied.
DM 2610035691 07-14_3D20 7/3/14 2:41 PM Page 15

Dremel 3D20 Idea Builder Specifications

General

Printing material	Polylactic acid (PLA)
Layer thickness (min)	0.1 mm
Number of print heads	1
Maximum build size (WxDxH)	228 x 149 x 139 mm
Control type	Touch
Product color	Blue, Grey, White
Viewing window	Yes
Display diagonal	3.5 \
Display technology	IPS
Maximum extruder tip temperature	230 °C
3D scanner	No
Compatible memory cards	SD
AC input voltage	230 V
Cables included	USB
Number of print platform stickers	2

Weight and Dimensions

Depth	335 mm
Width	485 mm
Height	400 mm
Weight	8850 g